Sand Casting of Carbon Steel Check Valve

Sand Casting of Carbon Steel Check Valve

A check valve is a valve in which the opening and closing member is a circular valve flap and acts on its own weight and medium pressure to block the flow of the medium.

Product Details

With more than 30 years of casting history, Wenzhou Longzhu   Industrial Co., Ltd. has a large number of experienced casting engineers and   technicians. We can produce castings of various sizes, shapes and materials   according to the drawings provided by customers, especially in the field of   valve castings. Cooperate with Fortune 500 companies for many years.

size:

2”-72”

pressure:

7500psi

Material selection:

GS-C251.0619,WCB.WCC,LCB,LCC,LC3,4C,4D,WC6,C5,C12, C12A,CA15CF3,CF8(-196’C),CF3M,CF8M,CF8C,CD4MCu,CK3MC   uN,ZG200-400,ZG230-450,ZG270-500,2G40Cr1,ZG20CrM0.2G15C   r1Mo1V,ZG35Cr1MO.ZG16CrMOG(1Cr5Mo),ZG1Cr13,ZGOCr18Ni9 Ti.5A.KmTB   Cr26.4A

weight:

3Ton

process:

Resin sand casting, etc.

Wenzhou Longzhu Industrial Co.,Ltd

Sales manager: Mrs.peng             E-mail: sylvia@china-longzhu.com

Tel: 0086-0577-86621768              Fax: 0086-0577-86621935

Address : No.19 Longyong   Road.Xiongxin Village. Longwan,Wenzhou,Zhejiang,China


A check valve is a valve in which the opening and closing member is a circular valve flap and acts on its own weight and medium pressure to block the flow of the medium. It is an automatic valve, also known as a check valve, check valve, return valve or isolation valve. The flap motion mode is divided into lift type and swing type. The lift check valve is similar in construction to the shut-off valve and lacks only the valve stem that drives the flap. The medium flows in from the inlet end (lower side) and flows out from the outlet end (upper side). When the inlet pressure is greater than the sum of the valve weight and its flow resistance, the valve is opened. Conversely, the valve closes when the media is reversed. The swing check valve has a valve that is inclined and rotatable about the shaft, and operates in a similar manner to the lift check valve. Check valves are often used as bottom valves for pumping devices to prevent backflow of water. The combination of the stop valve and the shut-off valve provides a safe isolation. The disadvantage is that the resistance is large and the sealing is poor when closed.


Sand Casting:

Also a casting process for valve casting parts. Sand casting is suitable for both steel and iron valve castings. Compare with lost foam and lost wax castings, it is more suitable to make larger valve components, so normally, we will need to leave more machining allowance for further machining operation. The max weight we can cast is around 3 tons per piece.


What service we offer?

We offer you OEM service for casting parts, especially in sand casting.

Sand casting, also known as sand molded casting, is a metal casting process characterized by using sand as the mold material. The term "sand casting" can also refer to an object produced via the sand casting process.Sand casting is relatively cheap and sufficiently refractory even for steel foundry use. In addition to the sand,a suitable bonding agent is mixed or occurs with the sand. The mixture is moistened with water to develop strength and plasticity of the clay and to make the aggregate suitable for molding.The sand is typically contained in a system of frames or mold boxes known a flask. The mold cavities and gate system are created by compacting the sand around models, or patterns, and or carved directly into the sand.


Hot Tags: sand casting of carbon steel check valve, suppliers, brands, customized, quotation, buy, best, low price

Inquiry

You Might Also Like